Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to assign IBIS file of a processor in Allegro?

Status
Not open for further replies.

buenos

Advanced Member level 3
Joined
Oct 24, 2005
Messages
957
Helped
40
Reputation
82
Reaction score
21
Trophy points
1,298
Location
Sunnyvale, California, USA
Activity points
9,084
hi

as i can see, the allegro doesnt support ibis files, only dml files. is that correct?

how can i assign (convert...) a single ibis file of a processor, to the processor (the corrrect io model to all pins, respectively) in the allegro? step-by-step...
 

vinaymg

Newbie level 1
Joined
Nov 26, 2007
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,284
Re: allegro and ibis

buenos said:
hi

as i can see, the allegro doesnt support ibis files, only dml files. is that correct?

how can i assign (convert...) a single ibis file of a processor, to the processor (the corrrect io model to all pins, respectively) in the allegro? step-by-step...

Hi

You can convert the ibis from analyze>SI/EMI Sim>Library..> from here select the translate tab to convert ibis
 

buenos

Advanced Member level 3
Joined
Oct 24, 2005
Messages
957
Helped
40
Reputation
82
Reaction score
21
Trophy points
1,298
Location
Sunnyvale, California, USA
Activity points
9,084
allegro and ibis

ok thanx.
i found it, but it doesnt convert some ibis files, and it converts some others. for example ia have a processor ibis file from AMD. i used it in hyperlynx successfully, but allegro drops errors, like illegal characters in the file...
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top