Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to add a footprint into my library- allegro 16.3

Status
Not open for further replies.

Prince Moses

Member level 1
Joined
Feb 4, 2011
Messages
41
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Location
Bangalore
Activity points
1,552
hi mate..

I have one brd file (Allegro 16.3), from which i want to take out one foot print to be used for another design. how can i add that foot print into my library. plz help me. thank u.
 

kabaleevisu

Advanced Member level 2
Joined
Apr 14, 2010
Messages
616
Helped
85
Reputation
170
Reaction score
81
Trophy points
1,308
Location
Chennai,India
Activity points
4,512
hi prince ,


first export the footprint from board file, file export ---> library save it in one location
open your schematic which symbol footprint to change right click --> edit property
generate net list

in board file --->go to setup---> user preference --> change libary path for your footprint location (pad path , psm path )

and then

import the netlist file in your board
 
  • Like
Reactions: samym

    samym

    points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top