Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How inductance affect PCB trace...

Status
Not open for further replies.
KP

KP

Member level 2
Joined
Jun 16, 2005
Messages
46
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,637
inductance pcb trace

Hi any expert

Could anyone explain in short how inductance build up between PCB traces can affect its performance(signal integrity)?Let say I have two 10 mil trace width with air gap between is 10mil and each carry 5mA at 1GHz.

Thanks.

Regards
KP
 

Often 10mil spacing is NOT quite enough for keepout. Mutual EM coupling may get higher percentage with closer spacing. Usually we have to keep at least 2 times of trace width. You can refer to this document may helps!

wilson
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top