Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me import a logo into PCB and use it as a layer (EAGLE)

Status
Not open for further replies.

folks

Full Member level 3
Joined
Oct 30, 2006
Messages
182
Helped
32
Reputation
64
Reaction score
14
Trophy points
1,298
Location
Guadalajara
Activity points
2,341
Hi all.
I'm attempting to convert or import a logo into my PCB, and then place the logo as a layer.
I was attempting with two "bmp to scr" converters from Eagle web site, but the result is to ugly.
I would like something like this:



please help me.
thanks!
 

chucka

Newbie level 4
Joined
Aug 9, 2007
Messages
5
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,315
Help me with EAGLE

Do you want this as copper or simply on your silkscreen.
 

folks

Full Member level 3
Joined
Oct 30, 2006
Messages
182
Helped
32
Reputation
64
Reaction score
14
Trophy points
1,298
Location
Guadalajara
Activity points
2,341
Re: Help me with EAGLE

I want that on my silk screen please

Added after 5 hours 31 minutes:

Thanks to me, I found a perfect way :D

 

folks

Full Member level 3
Joined
Oct 30, 2006
Messages
182
Helped
32
Reputation
64
Reaction score
14
Trophy points
1,298
Location
Guadalajara
Activity points
2,341
Re: Help me with EAGLE

zoomcityzoom said:
What was the solution? How did you import the image?

Tom
www.wizbangdesigns.com
hi zoomcityzoom
Sorry for do not answer before but I lost my post.
For import a bmp:
run "import-bmp.ulp".
Select no scan
Select only the pricipal color of you picture
Enable checkbox scaled
if your picture are big, Enable checkbox MM
Factor for a pixel = 1 or 2 mil
select the layer 21 or other.
select ok
Run script
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top