Help me import a logo into PCB and use it as a layer (EAGLE)

[folks]

Hi all.
I'm attempting to convert or import a logo into my PCB, and then place the logo as a layer.
I was attempting with two "bmp to scr" converters from Eagle web site, but the result is to ugly.
I would like something like this:

please help me.
thanks!

 

[chucka]

Help me with EAGLE

Do you want this as copper or simply on your silkscreen.

 

[folks]

Re: Help me with EAGLE

I want that on my silk screen please

Added after 5 hours 31 minutes:

Thanks to me, I found a perfect way

 

[zoomcityzoom]

Re: Help me with EAGLE

What was the solution? How did you import the image?

Tom
www.wizbangdesigns.com

 

[folks]

Re: Help me with EAGLE

What was the solution? How did you import the image?

Tom
www.wizbangdesigns.com

hi zoomcityzoom
Sorry for do not answer before but I lost my post.
For import a bmp:
run "import-bmp.ulp".
Select no scan
Select only the pricipal color of you picture
Enable checkbox scaled
if your picture are big, Enable checkbox MM
Factor for a pixel = 1 or 2 mil
select the layer 21 or other.
select ok
Run script

 

[zoomcityzoom]

Re: Help me with EAGLE

Thanks for the info!

Tom
www.wizbangdesigns.com