Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help for AMS Simulation

Status
Not open for further replies.

DenisMark

Full Member level 6
Joined
Sep 16, 2005
Messages
325
Helped
104
Reputation
208
Reaction score
34
Trophy points
1,308
Location
Russia
Activity points
3,436
ams simulator tutorial

I turn in Cadence AMS Designer and have problem.
I have IC5.033 and LDV5.0, AMS example from Cadence help (SAR_A2D) and tutorial for AMS simulation from Cadence AMS Environment help.
I follow this tutorial and at the elaboration stage have error:
ncelab: 05.00-p001: (c) Copyright 1995-2003 Cadence Design Systems, Inc.
ncelab: *E,NOUNIT: Unable to find a unit named 'mixedsignal' in the libraries.
ncelab: Memory Usage - 8.4M program + 1.6M data = 10.0M total
ncelab: CPU Usage - 0.1s system + 0.0s user = 0.1s total (0.5s, 12.0% cpu)
What is going on? Who can help me?

And second when I run ./runBehavioral example script I have error that "compile" and "compilevhdl" is not found. Where is it placed?
 

bigsnail

Junior Member level 2
Joined
Mar 8, 2004
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
195
cadence ams tutorial

please read the README.
"The Cadence-provided libraries must be compiled before use. Usually
the person who installs the Cadence software also compiles the
libraries so you can run the tutorial immediately. ...

The person who installed the software can compile the VHDL library
by changing directories into the $AMSHOME directory and running the
following command.

./tools/inca/files/install/ncvhdl.ins

Similarly, the library of connection modules can be compiled with
the following command, issued from the same location.

./tools/affirma_ams/etc/install/amsConnectLibCompile"
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top