yefj
Advanced Member level 4
Hello,I have a tansistor with the following caracteristics. i need to build a matching network for it. to get Max Gain as shown bellow.
assuming i will buy the network analizer bellow.
the problem is with the SMA cable, I cant connect it to the transistor on my breadboard.
what is the proper connector i should use to connect the SMA (that is connected to the network analyzer) so i get a correct reading of the impedance of the transistor?
Thanks.
assuming i will buy the network analizer bellow.
the problem is with the SMA cable, I cant connect it to the transistor on my breadboard.
what is the proper connector i should use to connect the SMA (that is connected to the network analyzer) so i get a correct reading of the impedance of the transistor?
Thanks.
AURSINC NanoVNA SAA-V2 Vector Network Analyzer 50KHz -3GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 1950mAh Aluminum Case: Amazon.com: Industrial & Scientific
AURSINC NanoVNA SAA-V2 Vector Network Analyzer 50KHz -3GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 1950mAh Aluminum Case: Amazon.com: Industrial & Scientific
www.amazon.com