Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

dsPIC oscillator and PLL question

Status
Not open for further replies.

Mateo_swe

Newbie level 6
Joined
Apr 21, 2008
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,348
dspic internal oscillator

Hi,

I want to run my dsPIC30F4011 in maximum speed (120MHz).
So i choose a 7,5Mhz crystal/resonator and set the PLL to x16.

But.. there are no 7,5MHz crystals or resonators.
It seems all crystal series skip the value 7,5 MHz.

OK, i choose 15MHz and set PLLx8.. What no 15MHz either??
Hmm.. I can choose 30MHz and set PLLx4, (they do manufature 30MHz)
but i don´t know if the PLL supports 30MHz.
The datasheet says it does in one place, and in another that 10MHz is max????

Have anyone used the PLL in dsPICs over 10MHz??

Thanks,
Mateo.
 

yus

Member level 2
Joined
Feb 14, 2009
Messages
48
Helped
12
Reputation
24
Reaction score
9
Trophy points
1,288
Location
Philippines
Activity points
1,509
dspic pll

dsPIC30F4011 has already an Internal Oscillator (same with other dsPICs).

I've aleady tried 40MIPs on a dsPIC33F using its internal 7.37 MHz osc with PLL.
 

aProgrammer

Full Member level 2
Joined
Mar 29, 2001
Messages
149
Helped
23
Reputation
44
Reaction score
13
Trophy points
1,298
Location
Syldavia
Activity points
610
dspic osc setting

Use a 7.3728Mhz xtall and PLL16.

This is a easy available xtall frequency and
good for to get perfect UART baudrates.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top