Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Doubt on Interconnect

Status
Not open for further replies.

surajkashyap

Newbie level 6
Joined
Jul 17, 2015
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
79
Hi All,

Suppose there is a long interconnect and we want to reduce the delay by adding buffers. Where should the buffers be added, at the mid point or towards the driver side or the destination side? Why?

Thank you
 

Hi All,

Suppose there is a long interconnect and we want to reduce the delay by adding buffers. Where should the buffers be added, at the mid point or towards the driver side or the destination side? Why?

Thank you

Hi,
If there is a long interconnect than chances of antenna violations are more so try to place the buffers in such a manner that even the antenna violations is overcome.If you place the buffers too far than also the signal can degrade and your buffer can give a metastable state so keeping these all constructs in mind try to add a buffer. .
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top