Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Design of UHF/ Microwave Amplifier

Status
Not open for further replies.

zonkee

Newbie level 2
Joined
Aug 21, 2007
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
Which transistor I can used to design the amplifier with this specifications:
Gain of 20dB at centre frequency
Centre frequency of 600 MHz
Noise figure: 5 dB
Fractional bandwidth 0.1
input and output impendance: 75 ohms
The device stability shall be quaranteed over the entireload and frequency range
 

Abhishekabs

Advanced Member level 3
Joined
Jan 12, 2007
Messages
758
Helped
115
Reputation
230
Reaction score
45
Trophy points
1,308
Location
India
Activity points
5,539
If you want good noise figure
go for NE3210S01 from CEL.
go on website www.cel.com
lot of good transistors available
ABhishekabs
 

khouly

Advanced Member level 5
Joined
Oct 20, 2003
Messages
2,368
Helped
461
Reputation
916
Reaction score
101
Trophy points
1,343
Location
EGYPT
Activity points
13,244
the NEC3210S01 is a microwave one , he want to design a 600 MHz transistor , i recommend u one of NXP BJT low noise transistors u can get a very good LNA with them in this range

khouly
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top