Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Design a circuit to divide input frequency by 2

Status
Not open for further replies.
N

narendra437

Newbie level 2
Joined
Oct 12, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
hyd
Activity points
1,293
Design a circuit to divide input frequency by 2
 

Heard of a toggle flop?
 

A normal D flop , D i/p connected to !Q, will work as div by 2 ckt
 

a D flipflop and a NOT, D output connects to NOT input, NOT output connects to D input, and D output is divided
 

hi qqdavid,
I think u did't get my wrds, instead of inferring a more inv, we can use Qbar, if avaialble Qbar pin avail in the lib, so that flop and inv gets integrated ,
 

Divide input frequency by 2 is so simple.

Input frequency is the input of T-FF and output of the T-FF is divide by 2 of the input frequency.

Got it....?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top