Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

circuit analysis formulas

Status
Not open for further replies.

walters

Advanced Member level 2
Joined
Jun 5, 2005
Messages
599
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
7,730
What formulas or calculations would i want to know for doing circuit analysis?

What information would i want to know or get from formula's or calculations?


Circuit analysis formulas to get?
1.) Use formulas to get the voltage's,current's and power of each component or node points of the circuits/design networks and stages
2.) Use formulas to get the time constant of RC networks?
3.) Use Formulas to get the GAIN of stages from transistors,ic,tubes etc.
4.) Use formulas to What else please??
 

Altafhal

Member level 2
Joined
Feb 13, 2007
Messages
42
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Location
Pakistan
Activity points
1,573
circuit formulas

Hi
ZFor this purpose u should study to books which can help u alot
1) Electric Circuits by Theodore F bogart
2)Fundamentals of circuit Analysis By Sadiko and Alexender

These books are all about circuits and u will find oput all ur questions answers

bye
 

walters

Advanced Member level 2
Joined
Jun 5, 2005
Messages
599
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
7,730
circuit analysis formula

5.) Q
6.) reactance
7.) resonance
8.) impedance
9.) bandwidth

What oscilloscope or FFT digital oscillscope or software simulations program can get these measurments?

5.) Q
6.) reactance
7.) resonance
8.) impedance
9.) bandwidth
 

raghuram_msc

Full Member level 1
Joined
Jul 3, 2007
Messages
95
Helped
5
Reputation
10
Reaction score
0
Trophy points
1,286
Activity points
1,930
ckt theory analysis formulas

Dear Walters

5.) Q
6.) reactance
7.) resonance
8.) impedance
9.) bandwidth

What oscilloscope or FFT digital oscillscope or software simulations program can get these measurments?

5.) Q
6.) reactance
7.) resonance
8.) impedance
9.) bandwidth
All the parameters yu have asked are ckt specific and therefore cannot be uniquely dicussed Talking of simulation s/w one can do all these measurements in EWB Multisim v3.1 or above. If you are seeking to just brush-up your fundamentals (quickly) then nothing like Schaums Outlines in Electric Circuits. This book is available at:-https://www.edaboard.com/viewtopic.php?p=293891#293891

Sai
 

ddska

Newbie level 1
Joined
Oct 2, 2007
Messages
0
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,280
Activity points
1,290
sadiko circuits

There are many formulas for analying circuits. Ohms Law is the most important for this purpose. Volts (V or E ) = Current (I) x Resistance (R) E = IR, I = V÷R,
R = V÷I , Power (W) = V x I . These are just a few. These formula's help troubleshoot circuits if there are problems or just to find out normal operating value's.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top