Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Capacitor as a ac bypass

Status
Not open for further replies.

SanjKrish

Member level 3
Joined
Feb 6, 2011
Messages
67
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
India
Activity points
1,855


I need to know whether my inference is right or wrong..

In this circuit, the voltage drop across the resistor R will be due to the 10V ac source alone and not due to the 5V dc source, as the capacitor will pass only the ac voltage and block the dc..
So the ac source voltage will be dropped between the capacitor and the resistor, and the dc source will just be a dummy..

Am I right??
 

Yaa... what you said is correct. The series connection of a DC source and AC source will result in a level shifted AC signal. But the capacitor will pass only AC signals and the AC voltage will be dropped across both the capacitor and resistor
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top