Can You Help Me Identify This Component?

Status
Not open for further replies.

Noch

Newbie level 3
Joined
Apr 3, 2013
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,301
I'm looking to identify the black component after the larger capacitors, and before the thyristor. It has the markings 'R100 0915', and some sort of a 'B'.
It's not in the parts list, I'm sure.

I appreciate any help.

Thanks!

The Component




 


It says R100 which is why I think it is 0.1 ohm. The link I gave shows several resistors which look the same but as you didn't give dimensions I cannot say exactly which.

Keith
 

A 0.5W resistor would be able to work up to about 3 amps to be within spec. (calculated for 0.05 ohm)
 

It says R100 which is why I think it is 0.1 ohm. The link I gave shows several resistors which look the same but as you didn't give dimensions I cannot say exactly which.

Keith

The photo's are all I have to work with, but judging from the size of the capacitor and thyristor, I'd say its dimensions are approximately 14mm x 4.5mm x ??mm (4-7 perhaps)

I agree that it is a 0.1 ohm resistor.

- - - Updated - - -

A 0.5W resistor would be able to work up to about 3 amps to be within spec. (calculated for 0.05 ohm)

Are you able to tell what function this resistor has?

The maximum amps I can produce is 1.16A, but usually no more than 0.6A using my wind turbine.
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…