Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Break down voltage of Nwell/Psub diode

Status
Not open for further replies.
L

lylnk

Member level 1
Joined
Sep 12, 2005
Messages
33
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,286
Location
China Beijing
Activity points
1,483
nwell/psub diode

Who know the break down voltage of Nwell/Psub diode(NWDIO) in TSMC 0.18um 1.8V/3.3V logic process?
The typical break down voltage, the minimum and the maximum.

Are the NWDIOs in 1.8v area and 3.3v area same? The psub will be same, the Nwell is same too?
 

The diode for 1.8V and 3.3V devices should be same.
 

I think the 1.8v NWDIO are 3.3v NWDIO are same too.

I want to know the break down voltage of Nwell/Psub diode. Any one know it?
The process is TSMC CMOS 0.18um 1.8/3.3V logic.
 

depending on thin and thick gate this breakdown voltage will depends..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top