Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

antenn design with HFSS

Status
Not open for further replies.

jyfx

Junior Member level 2
Joined
Jun 7, 2004
Messages
24
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
117
hfss student version

antenn design with HFSS

Added after 7 minutes:

who can give some sample
 

free hfss antenna design software

go to **broken link removed**. You can find the HFSS manual. There are a few examples inside.
 
Last edited by a moderator:

antenn

Hello!

Is there any kind of free/shareware versions of HFSS?
Or it is only for hard money?

I would like to learn, use but without the software... :) hard.

Thanks!
Z.
 
antenna design with hfss

Sorry, there is no free versions of HFSS. You may try some other software.

dz99 said:
Hello!

Is there any kind of free/shareware versions of HFSS?
Or it is only for hard money?

I would like to learn, use but without the software... :) hard.

Thanks!
Z.
 

hfss free software

Dear dz99,

If I'm not mistaken, I think there is a free student's version of some EM simulating program (not HFSS) on Ansoft's website. It may be something that you can work on.

Hope this helps,
Dave
 

hfss software student version

hi there are some word file about
antenna design but ie3d
 

hfss ansoft estudent

heedavid said:
Dear dz99,

If I'm not mistaken, I think there is a free student's version of some EM simulating program (not HFSS) on Ansoft's website. It may be something that you can work on.

Hope this helps,
Dave
there is a free student's version nemed designer on Ansoft's website
 

jimixu said:
heedavid said:
Dear dz99,

If I'm not mistaken, I think there is a free student's version of some EM simulating program (not HFSS) on Ansoft's website. It may be something that you can work on.

Hope this helps,
Dave
there is a free student's version nemed designer on Ansoft's website

OK, must be this: **broken link removed**
These are downloadable:

• Ansoft Designer SV
High-frequency linear circuit simulation, schematic and layout design entry.
New version with planar EM

• Maxwell SV
Two-dimensional, electromagnetic, and electrostatic-field finite element simulation

• Simplorer SV
Electrical system simulation with schematic capture, analog, digital, and mixed-signal modeling. Supports VHDL-AMS

Is anybody know something of these softwares?


Secondly: what about the Sonette vs. HFSS competition?
Which one is the useable one? Or we can't compare those two soft.?
 

**broken link removed**. here u may get the help u need
 
Last edited by a moderator:

I found some documents on the net. I hope it will help you.
 

I am studing a design about microstrip antenna. If it finishes, I will send it with explanations.

But now I have another problem. When I choose only one face of any object, I cant change its properties, because "Properties..." isnt active. Is there anybody who can tell how I can change?
 

Hi,

you need to isolate the plate using ctrl+b.

regards.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top