about Synopsys IC Compiler

[m.wahba]

I am using Synopsys IC Complier with Synopsys 90nm Generic Libarary

I always get this error

Error: Layer 'M1' is missing the 'resistance' attribute. (PSYN-100)
Error: Layer 'M1' is missing the 'capacitance' attribute. (PSYN-100)
Warning: Layer 'M1' is missing the optional 'edge capacitance' attribute. (PSYN-101)
Error: Layer 'M2' is missing the 'resistance' attribute. (PSYN-100)
Error: Layer 'M2' is missing the 'capacitance' attribute. (PSYN-100)
Warning: Layer 'M2' is missing the optional 'edge capacitance' attribute. (PSYN-101)
Error: Layer 'M3' is missing the 'resistance' attribute. (PSYN-100)
Error: Layer 'M3' is missing the 'capacitance' attribute. (PSYN-100)
Warning: Layer 'M3' is missing the optional 'edge capacitance' attribute. (PSYN-101)
Error: Layer 'M4' is missing the 'resistance' attribute. (PSYN-100)
Error: Layer 'M4' is missing the 'capacitance' attribute. (PSYN-100)
Warning: Layer 'M4' is missing the optional 'edge capacitance' attribute. (PSYN-101)
Error: Layer 'M5' is missing the 'resistance' attribute. (PSYN-100)
Error: Layer 'M5' is missing the 'capacitance' attribute. (PSYN-100)
Warning: Layer 'M5' is missing the optional 'edge capacitance' attribute. (PSYN-101)
Error: Layer 'M6' is missing the 'resistance' attribute. (PSYN-100)
Error: Layer 'M6' is missing the 'capacitance' attribute. (PSYN-100)
Warning: Layer 'M6' is missing the optional 'edge capacitance' attribute. (PSYN-101)
Error: Layer 'M7' is missing the 'resistance' attribute. (PSYN-100)
Error: Layer 'M7' is missing the 'capacitance' attribute. (PSYN-100)
Warning: Layer 'M7' is missing the optional 'edge capacitance' attribute. (PSYN-101)
Error: Layer 'M8' is missing the 'resistance' attribute. (PSYN-100)
Error: Layer 'M8' is missing the 'capacitance' attribute. (PSYN-100)
Warning: Layer 'M8' is missing the optional 'edge capacitance' attribute. (PSYN-101)
Error: Layer 'M9' is missing the 'resistance' attribute. (PSYN-100)
Error: Layer 'M9' is missing the 'capacitance' attribute. (PSYN-100)
Warning: Layer 'M9' is missing the optional 'edge capacitance' attribute. (PSYN-101)

I don't know where is the right tech file to use...
Anyone can help? thanks

 

[raju3295]

dump out the tech file from the mw database, and check for these values, if it dont have those then change the tech file with the correct one

 

[nav_vlsi]

check 2 things
1. your map input --> "-tech2itf_map" during mw creation lib
2. milkyway techfile is incorrect