Kristya
Junior Member level 1
I am dealing with a 6.4mm2x6.4mm2 array chip, and there is a long high frequency signal line in the chip(about 180MHz, 1um wide ,3.2mm long ,and made of top metal). I want to know if this metal line is ok for the signal transfor, would the signal attenuation happen? If true, how can I consider for correction.
As I now think this metal line should be regraded as transmission line. Is this right?
Thanks for advance.
As I now think this metal line should be regraded as transmission line. Is this right?
Thanks for advance.