Ninie_M
Newbie level 3
Hi,
I am doing simulation in ADS 2013 for OIP3 (3rd order Intermodulation) and P1dB (1dB compression).
Attach below is my OIP3 Setup.
P1dB Setup
The problem is when I'm simulate both controller, there are warning:
"For source Port1, (1xFreq[2] = 2.001e+09 Hz) is 1e+06 Hz away from the closest analysis frequency at 2e+09 Hz. The maximum allowed frequency difference is 2000Hz."
To solve this warning, I add another Freq[2] is XdB simulator (HB3).
Is this the correct way to solve the warning? or I can just ignore the warning?
Thanks in advance
I am doing simulation in ADS 2013 for OIP3 (3rd order Intermodulation) and P1dB (1dB compression).
Attach below is my OIP3 Setup.
P1dB Setup
The problem is when I'm simulate both controller, there are warning:
"For source Port1, (1xFreq[2] = 2.001e+09 Hz) is 1e+06 Hz away from the closest analysis frequency at 2e+09 Hz. The maximum allowed frequency difference is 2000Hz."
To solve this warning, I add another Freq[2] is XdB simulator (HB3).
Is this the correct way to solve the warning? or I can just ignore the warning?
Thanks in advance