elec-eng
Full Member level 5
Hi all
I am working in an ASIC project
The design needs a temporary storage space for data processing
the storage space should be 256x2 bits (i.e 256 locations,each location has two bits"
i also need to temporarily store 40 byte (40x8 bits)
so should I use ram or register files fore these two storage spaces
I know that for small sizes, register file is preferable over RAM
but note that in this case, the register file will need 8-to-256 deocder to decode the address and 256-to-1 mux to get out the desired data
please tell me which is suitable
also could anyone please give a compact code for large register files
thanks
I am working in an ASIC project
The design needs a temporary storage space for data processing
the storage space should be 256x2 bits (i.e 256 locations,each location has two bits"
i also need to temporarily store 40 byte (40x8 bits)
so should I use ram or register files fore these two storage spaces
I know that for small sizes, register file is preferable over RAM
but note that in this case, the register file will need 8-to-256 deocder to decode the address and 256-to-1 mux to get out the desired data
please tell me which is suitable
also could anyone please give a compact code for large register files
thanks