Jul 30, 2008 #1 S suquid29 Junior Member level 2 Joined May 2, 2008 Messages 21 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,437 Hi, I'm using (at the university) an XUP VirtexII Pro board with DLP interface (https://www.dlpdesign.com/usb/usb245.shtml) . I looked everywhere but I didnt find how to code the register in VHDL that i could configure through the DLP. I'm looking for a working example of register code (and its protocol) and the way to write and read from it. Thanks!
Hi, I'm using (at the university) an XUP VirtexII Pro board with DLP interface (https://www.dlpdesign.com/usb/usb245.shtml) . I looked everywhere but I didnt find how to code the register in VHDL that i could configure through the DLP. I'm looking for a working example of register code (and its protocol) and the way to write and read from it. Thanks!