Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

XUP Virtex-II Pro board - access with DLP

Status
Not open for further replies.

suquid29

Junior Member level 2
Joined
May 2, 2008
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,437
Hi,

I'm using (at the university) an XUP VirtexII Pro board with DLP interface (https://www.dlpdesign.com/usb/usb245.shtml) .

I looked everywhere but I didnt find how to code the register in VHDL that i could configure through the DLP.

I'm looking for a working example of register code (and its protocol) and the way to write and read from it.

Thanks!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top