bensooraj
Newbie level 2
Platform : Xilinx Virtex II Pro Board
Software : Xilinx ISE
I generated a BRAM (Width : 4; Depth : 16) using IP Core Generator and initialised it using a .COE file.
4-bit address mapped to 4 switches on board.
4-bit data mapped to 4 LEDs on board.
When I input the binary values (0000 to 1111) in a sequence(ascending/descending) for initialising the generated BRAM using the .coe file, it is working properly, right data at any given address.
but for a random sequence of 16 4-bit data, the BRAM is not responding with the right data. Any suggestions please. Am I missing out anywhere?
Thanks.
Software : Xilinx ISE
I generated a BRAM (Width : 4; Depth : 16) using IP Core Generator and initialised it using a .COE file.
4-bit address mapped to 4 switches on board.
4-bit data mapped to 4 LEDs on board.
When I input the binary values (0000 to 1111) in a sequence(ascending/descending) for initialising the generated BRAM using the .coe file, it is working properly, right data at any given address.
but for a random sequence of 16 4-bit data, the BRAM is not responding with the right data. Any suggestions please. Am I missing out anywhere?
Thanks.