Will 89S52 run with input supplied by 7805 regulator?

Status
Not open for further replies.
S

sam08016

Member level 1
Joined
May 9, 2009
Messages
33
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,527
Can I run 89S52 with an input supplied by 7805 regulator...
It gives 5V output supply...and max 150mA current, and it takes input 8-18V
will it fulfill the current demands of 89S52,in order to function properly???
 

Re: Supply To 89S52

The 7805 regulator can give you up to 1A at 5V, but without a heatsink the "safe" current is estimated to be below 100mA (that depends on the input voltage, P[heat]=[vin-5V]* I[load] ) ..

100mA is sufficient current to supply AT89S52, no worries ..

IanP
 

Re: Supply To 89S52

Hi,

Yes, definately you can use this to supply your controller. The current and voltage you mentioned is sufficient to run your application.

NIKS
 

Re: Supply To 89S52

sam08016 said:
Can I run 89S52 with an input supplied by 7805 regulator...
It gives 5V output supply...and max 150mA current, and it takes input 8-18V
will it fulfill the current demands of 89S52,in order to function properly???
Click to expand...
Yes...more than sufficient for the said device..Cheers
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…