Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Why the FFT simulation of VCO output is like this?

Status
Not open for further replies.
C

cqmyg5

Advanced Member level 4
Joined
Oct 21, 2003
Messages
118
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,298
Activity points
963
fft simulation

Dear everyone,

I have simulated a simple LC VCO by Hspice, which oscillation frequency is 2.5G and I perform a fft simulation like:

.fft v(vco) start=100n stop=150n

but the probe-out spectrum is strange because the phase-noise is about -5dBc/Hz@1Mhz, this value is different from the result got out of SpectreRF of cadence(it is about -120dBc/Hz@1Mhz).

Could anyone tell me why?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top