Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
here is a cheap but not versatile solution which I use on 8051 systems:
With a universal programmer (GALEP III) I program the code to a
FLASH-EPROM (AM29F010). Then I use an adaptor socket that makes it
look like a 27C512 to the µC.
I think you can also get 27F512 FLASH-EPROM.
But as I said: not very versatile. You'll have to use different adaptors
for different EPROM sizes.
If emulating a 256Kbit EPROM ( 8 bit only)will suffice, the one in Elekt0r january 2001 is pretty fine. It works off the serial port and is based on a at89c2051. Source code and PCB is available at their web site. and the mag itself is available on another thread around.