which differential amplifier configuraion should i choose?

Status
Not open for further replies.
S

samuel

Full Member level 3
Joined
Nov 15, 2004
Messages
171
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Location
world
Activity points
1,143
Now, I want to design differential amplifier tused to substract the two signals from correlated double sample(CDS).

input signal range : 3～3.9, that is to Vin+ ≤3.9 and Vin-≥3.
powe supply:5V
frequencey:≥5M
load: capacitance:15p

anyone can give me some advice?

thanks.

samuel.
 

what's supply voltage? Signal frequency? Power consumption? Driving capability?
 

    S

    samuel

    Points: 2
    Helpful Answer Positive Rating
N-input-pair better for high input cm level,
and your working freq is high, also you need only drive cap loads, so 1-stage folded-cascode is good for your design.
Take care to your GBW and SR.
 

    S

    samuel

    Points: 2
    Helpful Answer Positive Rating
Re: which differential amplifier configuraion should i choos

castrader said:
N-input-pair better for high input cm level,
and your working freq is high, also you need only drive cap loads, so 1-stage folded-cascode is good for your design.
Take care to your GBW and SR.
Click to expand...

N-input pair has better matching and more gain. But why better for high input level? Comment pls. Using p-input you get more slewing and less noise
 

    S

    samuel

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…