Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what meant by Trace?

Status
Not open for further replies.
M

manikanta.9332

Member level 3
Member level 3
Joined
Mar 29, 2012
Messages
62
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Banglore
Activity points
1,614
Hi all,

what meant by Trace?
Trace and metal layers are equal or not?


Thanks.........
 

Metal layers contains trace... a track you can saw... so traces are "carved" out from whole metal layer to provide signal path to destination
 

in order to get signal from one point to another u use wires in bread board or veroboard.. in pcb you do this by copper tracks called trace.
if you have seen a pcb the bottom side full of copper is the metal layer .. you etch or carve out traces from this layer
i can't be more brief
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top