Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what is signal energy

Status
Not open for further replies.
Virus King

Virus King

Member level 2
Joined
Feb 26, 2007
Messages
48
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Location
JaMaN RoAd BaNnU
Activity points
1,602
how can we find the energy of received signal in point to point link in microwave.
is there any guide or way to impliment in any programming language or matlab
 

1. For P2P microwave link, first you should know what type the signal is: FSK/QPSK/16QAM/64QAM/128QAM/256QAM/CDMA..., 56M/28M/14M/7M/3.5M etc. And estimate the receiver signal level by link budget.

2. Abouthow to program it, you can refer Microwave Office Examples, there are many examples about 128QAM/16QAM BER calculate. BER has some relation with ENR.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top