VHDL QUESTION Can someone help me

derrick_chi said:

I need to know what exactly is wrong with the design of this STATE MACHINE. I need someone to take a look and help me out with this one.



entity Test1_Module is
PORT (clk_count: IN STD_LOGIC_VECTOR ( 7 DOWNTO 0);
finished1, RST, CLK, INPUT_SIGNAL1, INPUT_DELAYED : IN STD_LOGIC;
ld_output, up_down, done, ld_accs, clr_count, cnt_cntrl, SEL1: OUT STD_LOGIC;
max_sc : OUT INTEGER RANGE 0 TO 256 );


end Test1_Module;

architecture Behavioral of Test1_Module is

TYPE state IS (state0, state1, state2, state3, state4);
SIGNAL pr_state, nx_state : state;

begin

process (clk,rst)
begin
if (rst ='1') then

pr_state <= state0;

elsif (clk'Event and clk = '1') then

pr_state <= nx_state;

end if;
end process;


process (pr_state, clk_count, finished1)
begin
case pr_state is

when state0 =>

nx_state <= state1;

when state1 =>

if ( clk_count = 5 ) then

nx_state <= state2;

else

nx_state <= state1;
end if;

when state2 =>

if ( finished1 = '1' ) then

nx_state <= state3;
else

nx_state <= state2;
end if;

when state3 =>

if ( finished1 = '1' ) then

nx_state <= state4;
else

nx_state <= state3;
end if;

when state4 =>

nx_state <= state4;

end case;
end process;

process (pr_state)
begin
case pr_state is

when state0 =>

ld_output <= '0';
up_down <= '1';
done <= '0';
ld_accs <= '0';
clr_count <= '1';
cnt_cntrl <= '0';
SEL1 <= '0';
max_sc <= 0;


when state1 =>

ld_output <= '0';
up_down <= '1';
done <= '0';
SEL1 <= '0';
max_sc <= 0;
cnt_cntrl <= '1';

if ( input_signal1 = '1' and input_delayed = '1') then

ld_accs <= '1';
clr_count <= '1';
else

ld_accs <= '0';
clr_count <= '0';
end if;

when state2 =>

up_down <= '1';
done <= '0';
ld_accs <= '0';
clr_count <= '1';
cnt_cntrl <= '0';
max_sc <= 0;
done <= '0';
SEL1 <= '0';

if ( finished1 = '1' ) then

ld_output <= '1';
else

ld_output <= '0';
end if;

when state3 =>

ld_output <= '0';
up_down <= '1';
done <= '0';
ld_accs <= '0';
clr_count <= '1';
cnt_cntrl <= '0';
SEL1 <= '1';
max_sc <= 255;

when state4 =>

ld_output <= '0';
SEL1 <= '1';
up_down <= '0';
done <= '1';
ld_accs <= '0';
cnt_cntrl <= '1';
clr_count <= '0';
max_sc <= 255;

end case;
end process;
end Behavioral;

Click to expand...