verilog model of spi flash memory needed

Status
Not open for further replies.

rockgird

Junior Member level 3
Joined
Apr 28, 2006
Messages
30
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,543
spi flash memory

hello,

I've designed, an SPI core for code loading on my chip. Now i have to test it in the master mode. for that i m looking for a Spiflash (ex. winbond ) interface.

If any one has a verilog code for that, I would be really really grateful.

thanks in anticipation
 

Re: spi flash memory

i need to have both actually ...

I2C i already have ... and SPI is the one i've to test ...
 

Hi rockgird,

You can use the following SPI Verification IP:

http://syswip.com/spi-verification-ip

It is not SPI flash model but you can use it to model any SPI masters or slaves.
Best Regard,
Syswip.
 

hi all,
I designed an SPI interface and want to integrate an spi flash memory to it.Actually I’m a bit confused about something

All the memories I find with the needed specs (16Mbits, 100Mhz) have 24 bits address space but organized in 8 bits address
The 24 bits address space is designed to have 3 memory addresses if I want to read a data array… so it’s like a start and an end
The address I have is a 20 bits address.. do you have any idea if by any means I could work with the 8 bit address space or not???

THANKS

--Salma
 

You can get them freely from FLASH vendor's wedsits
 

Some flash vendors supply relative sim model, like MXIC,Spansion, Micron.You could find relative sim model on the website.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…