Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[General] using mplab with pickit 2

Status
Not open for further replies.
O

Olawale Johnson

Newbie level 1
Joined
Jun 27, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
i bought a pickit 2 programmer and after installation on the mplab ide, i found out that the programmer registers on my pc but mplab could not connet with it. please help me out.
 

Download the Compiler like if you are using PIC18 then also Install MPLab C18 Compiler or Hitech Compiler all details are available in Microchip's website
 

Hi,

You do not need to load a compiler to see the Pk2, the inbuilt assembler is there anyway.

You should see a drop down menu like this .

Once you connect the PK2 and select it from the menu, you should see a message like this.

Works fine from XP to W8.1

Don't forget you also have the stand alone programmer V2.61 for the PK2 which includes some useful tools ( all free downloads on the Pk2 site)
 

Attachments

  • 000049.jpg
    000049.jpg
    36.9 KB · Views: 80
  • 000050.jpg
    000050.jpg
    38.9 KB · Views: 71

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top