Using a Schottky diode on Virtuoso Schematic

Status
Not open for further replies.
M

Microemission

Member level 3
Joined
Jan 4, 2005
Messages
59
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,286
Activity points
619
schottkey diode in virtuso

Hi, I need to use a Schottky diode on a circuit on Virtuoso Schematic.
The problem is that when I insert the one from AnalogLib named "schottky", I don't know which parameters to specify on the properties window on the diode, such as:
- model name
- device area
- junction perimeter caracter
- lenght
- width
- etc...
My goal is to obtain a 3V forward drop Schottky diode.
I tried specifing on model name, a model I found by NXP for a bat54 diode, but after some trying I gave up, as it produced too much errors.
Can anyone help me on this?
 

schottky diode schematic

Hi,

Generally any diode used in a schematic it should be specify area,pj(junction parameter),model. layout designer calculate length and width according to the area & pj(if length & width also specify in schematic their is no problem).

Thanks & Regards
Koti.

Added after 1 minutes:

Hi,

Generally any diode used in a schematic it should be specify area,pj(junction parameter),model. layout designer calculate length and width according to the area & pj(if length & width also specify in schematic their is no problem).

Thanks & Regards
Koti.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…