myown
Member level 1
After trying Program my Target I recieve messege:
Programming Target...
...Erasing Part
...Programming Program Memory (0x0 - 0xAFF)
Verifying...
...Program Memory
ICD0161: Verify failed (MemType = Program, Address = 0x0, Expected Val = 0xEFB0, Val Read = 0xFFFF)
ICD0275: Programming failed.
MPLAB ICD 2 Ready
Setting Vdd source to target
After Power off of PIC (non ICD2), and then power on I program and
->
Programming Target...
...Erasing Part
...Programming Program Memory (0x0 - 0xAFF)
Verifying...
...Program Memory
...Verify Succeeded
Programming Configuration Bits
.. Config Memory
Verifying configuration memory...
...Verify Succeeded
...Programming succeeded
MPLAB ICD 2 Ready
Anybody can tell me what is that?
Programming Target...
...Erasing Part
...Programming Program Memory (0x0 - 0xAFF)
Verifying...
...Program Memory
ICD0161: Verify failed (MemType = Program, Address = 0x0, Expected Val = 0xEFB0, Val Read = 0xFFFF)
ICD0275: Programming failed.
MPLAB ICD 2 Ready
Setting Vdd source to target
After Power off of PIC (non ICD2), and then power on I program and
->
Programming Target...
...Erasing Part
...Programming Program Memory (0x0 - 0xAFF)
Verifying...
...Program Memory
...Verify Succeeded
Programming Configuration Bits
.. Config Memory
Verifying configuration memory...
...Verify Succeeded
...Programming succeeded
MPLAB ICD 2 Ready
Anybody can tell me what is that?