Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

USB Controller and USB Flash drive(PEN Drive) Requirement

Status
Not open for further replies.

VJKris

Member level 1
Member level 1
Joined
Jun 22, 2012
Messages
33
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,530
Hi,

I have a query on deciding USB flash requirement.
Is there a relation between USB controller(in Processor) and the Pen drive size that can be connected?
Basically,if i have a USB host controller integrated in my processor,will i be able to connect a PEN drive of any size?
Or are there any practical limitation?

Regards,
VJ
 

The only limitation is that your software must be able to handle the file system used on the memory device. The USB mass storage device protocol doesn't care for memory size.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top