Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I can't deal with this site. Can anyone post the files directly on the board?
Are the schematics for ulink or for ulink2? ulink depends on AN2131QC which is already obsolete.
Many thanks.
Finally I managed to register and login. i donwloaded the schematics but there is hex file for the code inside the microcontroller. Does anyone have this software?
Yes, Keil has this software and owns the copyright to it as well as for the ULINK2 hard- and software itself.
It makes me feel sick to see all this pirating going on in plain public view. Any chance some moderator could jump in?
I have tried to check the compatibility of the AN2131Q with new generation of FX2 & FX1 controllers. The file provided in the archive gives a image to be loaded in to the EEProm interfaced to the Cypress chip. The Cypress chip has no flash and it loads program from the EEPROm provided on the board. The File provided in this post is helpful for only getting the signature it shows up when the device is connected but doesnt contain any program as such.
However I feel that the Keil IDE would load the target device using the Cypress general USB driver and then execute it on the fly. This way they neednot have the code in the EEPROM also.
Well for the sake of observation I have uploaded some datasheets of the new USB FX2's available.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.