ulink schematics
Hello,
I have tried to check the compatibility of the AN2131Q with new generation of FX2 & FX1 controllers. The file provided in the archive gives a image to be loaded in to the EEProm interfaced to the Cypress chip. The Cypress chip has no flash and it loads program from the EEPROm provided on the board. The File provided in this post is helpful for only getting the signature it shows up when the device is connected but doesnt contain any program as such.
However I feel that the Keil IDE would load the target device using the Cypress general USB driver and then execute it on the fly. This way they neednot have the code in the EEPROM also.
Well for the sake of observation I have uploaded some datasheets of the new USB FX2's available.
Warm Regards,
Boseji