the one who able to answer this question will become network expert

[forksdude]

For suppose if we have three computers comp A, comp B, & comp C as shown in figure.
How they will work as transmitter as well as receiver i.e. transceiver
How can we achieve that?
How a protocol can design for this type of system?
What software we need to use in the computer?
We can use matlab, vhdl, & C
What hardware we need to use?
We can use FPGA, Transceivers, rs-232 etc.

 

[malik_zohaib]

try this

Network topology - Wikipedia, the free encyclopedia

 

[chaluraje]

Devices Rq for it
1)8port switch
2)cat5/6 cable
3)RJ45 connector
Process) create straight crimping for cat5 or cat 6 cable
connect them to their 1 side to swith port and 2nd side to comp Lancard

=------=:8)

 

[teddynalias]

For suppose if we have three computers comp A, comp B, & comp C as shown in figure.
How they will work as transmitter as well as receiver i.e. transceiver
How can we achieve that?
How a protocol can design for this type of system?
What software we need to use in the computer?
We can use matlab, vhdl, & C
What hardware we need to use?
We can use FPGA, Transceivers, rs-232 etc.

it is a basic question not an expert ...
i think chaluraje is right

 

[VSMVDD]

isnt this just node based rs232
old hat stuff?? 432 made a better job for serial stuff

as for network

man as above the right foldback cables ,,,

if you want three way rxtx on urban systems no cpu and network based
you need to use i2c

to solve this using midi to rs232 properly i had to use 2 micros per i/o
to provide 0 latency and plenty of buffer space incase of tie ups