stereo input ADC using dspic

[ransiluj]

hi all!!
i want to convert the output of the microphone using dspic through stereo jack. I'm using mikro C pro for dspic. in stereo jack there are 3 pins. i have to convert both left and right pins to take the clear voice from microphone? how can i do this? please help me to ADC conversion.

dspi = dspic30f3011

thank you

 

[ransiluj]

i'm doing noise suppression and communication. I have headphone with microphone. Things that i talk through mic should transfer to dspic through stereo jack and send it through bluetooth to the other person who have same device like mine. So I'm stuck in the my voice transferring to dspic part.

I have an idea of how to make analog circuit between stereo jack and dspic using voltage dividers but i have no idea about how to ADC the output of the microphone. please help me.

 

[FvM]

Headset microphones are usually mono, not stereo.

The microphone output voltage need to be amplified to ADC input voltage range.

 

[ransiluj]

Headset microphones are usually mono, not stereo.

The microphone output voltage need to be amplified to ADC input voltage range.

um using samsung stereo headset SHS-100V/W.. are you sure FvM ?

this is the headphone output jack https://i.stack.imgur.com/zluWE.gif

 

[FvM]

You have been asking for microphone, not headphone connection.