Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

SRR having ground plane or not??????????

Status
Not open for further replies.

mahibhavana

Newbie level 3
Joined
Nov 7, 2008
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,306
i designed CSRR, in my design i used substrate(FR4-epoxy),strip line(copper) and ground plane(copper).i etched the rings structers from the ground plane(copper).
now iam designing the SRR,first i took one substrate(FR4-epoxy) after this idesigned rings(copper) structer on the substrae my doubt is ground plane is requred or not at the other side of substrate.please help me asap..
thankyou....
 

grandizer

Member level 1
Joined
Jun 7, 2005
Messages
37
Helped
6
Reputation
12
Reaction score
0
Trophy points
1,286
Location
Germany
Activity points
1,562
Dear,
There is no need for Ground Plane for an SRR.
SRR in principle working in magnetic field , and it show some inductance , while the capacitance is formulated between the gap edge.

best regards
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top