- Joined
- Jan 22, 2008
- Messages
- 52,400
- Helped
- 14,749
- Reputation
- 29,780
- Reaction score
- 14,094
- Trophy points
- 1,393
- Location
- Bochum, Germany
- Activity points
- 298,004
According to you above circuit, you are showing current and voltage at a resistive load.
Three possible explanations (there may be more):
- the load isn't resistive
- the measurement is incorrect
- the cirscuit is different
My previous remark about the filter dimensioning being unsuitable was mainly related to the observed resistor overload, which also shouldn't happen.
The voltage looks like a clean sine waveform, the current doesn't.Yellow - output voltage on the load;
Blue - output current on the load;
Three possible explanations (there may be more):
- the load isn't resistive
- the measurement is incorrect
- the cirscuit is different
My previous remark about the filter dimensioning being unsuitable was mainly related to the observed resistor overload, which also shouldn't happen.