Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SPRINT EXPERT (SMS GmbH) TOP40DIP device programmer software

Status
Not open for further replies.

BENOIT

Member level 5
Joined
Sep 22, 2001
Messages
89
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
France
Activity points
1,900
sprint expert

Anybody would have the software corresponding to this no longer
supported device (Eprom & PLD) programmer from SMS GmBH.
This programmer is connected to the P.C. with an ISA internal Card
it is "model S100".
Thanks for any help;
SMS GmBH has been bought by DATA-IO but DATAio no longer
give any support for the EXPERT version.
MB.
 

BENOIT

Member level 5
Joined
Sep 22, 2001
Messages
89
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
France
Activity points
1,900
sprint expert smp

I have downloaded the software which is on
http://ftp.dataio.com/sprint/expert/
it is C/99 version but when I use it with my S100 programmer
The software stay in Demo Mode and advert me that the programmer
must have a Software Maintenance Plan.
otherwise all the tests of the programmer have passed OK
with the test program it is written SMP expired : No SMP
anybody would have an old package that will work with my programmer
or know what to do to make it working?
thanks for any help.
MB.
 

BENOIT

Member level 5
Joined
Sep 22, 2001
Messages
89
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
France
Activity points
1,900
sprint programmer

for further references I have done a resources page about this
programmer here :
http://matthieu.benoit.free.fr/131.htm
someone is trying to analyze now how is done the SMP Module
it is done of a 93C46 eeprom and a PAL Intel 5C032 (equivalent
to Altera EPC320 or PAL16V8)
... To be continued


BENOIT said:
I have downloaded the software which is on
http://ftp.dataio.com/sprint/expert/
it is C/99 version but when I use it with my S100 programmer
The software stay in Demo Mode and advert me that the programmer
must have a Software Maintenance Plan.
otherwise all the tests of the programmer have passed OK
with the test program it is written SMP expired : No SMP
anybody would have an old package that will work with my programmer
or know what to do to make it working?
thanks for any help.
MB.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top