Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Speech Recognition in PIC , How ?

Status
Not open for further replies.

Alwaleed2

Member level 3
Joined
Jun 27, 2005
Messages
54
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,660
Is there away to apply Speech Recognition in PIC , Is there a project in this topic
 

phoenixdk

Junior Member level 1
Joined
Dec 26, 2005
Messages
16
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,453
im consider my self pretty good at programming for the pic series and i dont have a clue on how to implent such a function.
I would guess some sort of algorythm would be need to analyse the recorded speech and i dont think the pic has enough processing power.
just look at the commercial speech recognition programs, they still have chield diseases
 

alzomor

Advanced Member level 2
Joined
Jun 9, 2005
Messages
678
Helped
39
Reputation
78
Reaction score
8
Trophy points
1,298
Location
Cairo
Activity points
6,417
Asslamo 3likom

Regarding PIC I have no information

but few years ago I have found a research paper for chineese researchers they add some HW on 8051 core to implement speach recognition

Winbond too have some solutions for speach recognition within embedded systems

Salam
Hossam
 

gidimiz

Advanced Member level 1
Joined
Feb 3, 2005
Messages
427
Helped
124
Reputation
248
Reaction score
40
Trophy points
1,308
Activity points
5,157
Hi,

For the dsPIC30 and the dsPIC33 Microchip does have dsPIC30F Speech Recognition Library. Us, the free users cant use it because you have to pay for it as its a 3ed party that made it for Microchip.
What can we do? well, read the info on the microchip web site and maybe you will comeup with your own code...
https://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en023596

The that microchip sales is only for U.S english only, and only for 100 known words. So, Good luck.
 

enigma460

Member level 4
Joined
Dec 28, 2001
Messages
75
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,288
Activity points
539

waseem

Full Member level 5
Joined
Apr 13, 2005
Messages
284
Helped
64
Reputation
128
Reaction score
19
Trophy points
1,298
Location
Pakistan
Activity points
3,674
Hi!
I too haven't worked with speech recognition but as far as simple speech recognition is concerned (as implemented in low end cell phones) the idea is to record the sound in digital form, and then when someone repeats the same words the sound is agian recorded digitally and compared with the orignal recorded data.
Now if the comparision is within a certain limit let us say 80% similar to orignal recorded sound then the system thinks that the orignal word has been repeated.

Differnet techniques can be used to do the comparision. One way is to add all the digital samples for the orignal recorded sound this will give a certain figure. Similarly add the digital samples for the word to be compared and then check the difference between between the two sums. If it falls within 80% of the orignal sum then chances are that the orignal word has been repeated.
Any ways that is just my own idea.
Regards.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top