Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

spartan 3e starter kit adc

Status
Not open for further replies.

Psyfusion

Newbie level 5
Joined
Mar 1, 2006
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,349
spartan3e starter kit adc

Hi!

I'm a bit new to fpga-s. I need help or sample code (vhdl if possible) for the A/D module.
I need a controller that initiates conversion and stores the data in a register or variable.

If you can, please help!

Thanx!
 

nxtech

Full Member level 5
Joined
Jun 13, 2007
Messages
258
Helped
17
Reputation
34
Reaction score
2
Trophy points
1,298
Location
NO HIDDEN LINKS
Activity points
2,772
spartan 3e kit adc

If you look at the users guide you will see that the Spartan 3e kit already has the code to control the Linear Tech A/D that is on the board. All you need to do is feed the analog signals to the preamp that is connected to the header on the board.

The FPGA will control both the preamp and the A/D. Once the data is converted it is brought into the FPGA via pin N10.

See page 74 of the users guide for more info.

Hope this helps.

E
 

ytmm

Newbie level 6
Joined
Mar 8, 2010
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,354
Hello Psyfusion;

I'm trying to use adc on the spartan 3e now, but I have some problems I couldn't solve. If you find some documents and codes about this subject could you give me?

Thanks:)
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top