GowthamJGR
Newbie level 4
- Joined
- Mar 18, 2013
- Messages
- 5
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Bangalore, India, India
- Activity points
- 1,309
Hi I have the design file which have a part looks like the image attached
![Make_solder_masks_in_silk_screen.JPG Make_solder_masks_in_silk_screen.JPG](https://www.edaboard.com/data/attachments/33/33874-ca6baeffddb7461e88e08e0edde05f51.jpg)
Can I make solder mask on Silkscreen using Eagle ?
Because it takes time to clean the silkscreen before soldering since the pads are covered by silkscreen
Do any body have idea to remove the silkscreen in the pad using eagle software
Thanks in advance
![Make_solder_masks_in_silk_screen.JPG Make_solder_masks_in_silk_screen.JPG](https://www.edaboard.com/data/attachments/33/33874-ca6baeffddb7461e88e08e0edde05f51.jpg)
Can I make solder mask on Silkscreen using Eagle ?
Because it takes time to clean the silkscreen before soldering since the pads are covered by silkscreen
Do any body have idea to remove the silkscreen in the pad using eagle software
Thanks in advance