Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Simulation of SRR using HFSS

Status
Not open for further replies.

jillu

Newbie level 4
Joined
Sep 22, 2010
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,316
While simulating the structure using HFSS, we use PEC-PMC boundary conditions along with wave ports. Could you suggest some links where i can read up on PEC-PMC boundary conditions and its implications?

Thanks.
 

tallface65

Full Member level 6
Joined
Dec 8, 2009
Messages
345
Helped
189
Reputation
392
Reaction score
173
Trophy points
1,323
Location
land of the free
Activity points
3,407
Better to use Floquet Ports and Master Slave boundaries. HFSS does these well and fast this way. See tutorial for getting started guide of unit cell setup.

have fun
 

jillu

Newbie level 4
Joined
Sep 22, 2010
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,316
Tried using that also...Thanks..But I wish to know what the Master-slave boundaries/ PEC-PMC boundaries which are refered in the manual or paper mean...their implications and conditions under which the simulations are being performed...Just to have a better idea..

Thanks.
 

ferdows

Advanced Member level 2
Joined
Mar 25, 2009
Messages
559
Helped
190
Reputation
382
Reaction score
186
Trophy points
1,323
Activity points
3,611
hi jillu
i suggested u this paper "MICROSTRIP ANTENNA'S GAIN ENHANCEMENT US-ING LEFT-HANDED METAMATERIAL STRUCTURE" by H. A. Majid, M. K. A. Rahim, and T. Masri in Progress In Electromagnetics Research M, Vol. 8, 235-247, 2009
 
  • Like
Reactions: olule

    olule

    Points: 2
    Helpful Answer Positive Rating

sc4rppph

Newbie level 6
Joined
Jul 22, 2012
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Korea
Activity points
1,350
Better to use Floquet Ports and Master Slave boundaries. HFSS does these well and fast this way. See tutorial for getting started guide of unit cell setup.

have fun


Can you send me a example file of SRR with floquet port ......i am not getting the correct phase while magnitude is same.......
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top