Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

simulation of cmos inverter in subthreshold region help plz

Status
Not open for further replies.

gmahajan027

Junior Member level 1
Joined
Jan 27, 2008
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,385
I was trying to simulate subthreshold region operation of a CMOS inverter

If I have a device of threshold voltage of NMOS =0.2volts , and I want to make a CMOS inverter with it that can operate in sub-threshold region.

plz suggest the vdd for the circuit I should use

I already used a Vdd of .150volts but could not get correct results.
Also what should be the magnitude of capacitance at output i tried using 1ff and 1e-4ff but no good results.

I will be thankful for any help..
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top