Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

servo control for scanner of robot

Status
Not open for further replies.
U

umer2007

Newbie level 4
Joined
Nov 9, 2006
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,310
i am controlling the robot arm with the help of servos (openservo.org). but the problem i am facing is with the control algorithm. the servo is not stable at its required position. I am controlling it with PID but i have tried every possibility with the pid parameters but the problem is the same. can anybody help me out or suggest a different control strategy.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top