Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

series flash microcontroller- device is not working properly

Status
Not open for further replies.

nobysbn

Newbie level 2
Joined
Sep 21, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
india
Activity points
1,305
A SERIOUS PROBLEM

I am Noby sebastian,An Engineering student from India.I have made the project 89 series flash microcontroller programmer from the link https://chaokhun.kmitl.ac.th/~kswichit/Pgm89v2/Pgm89_2v0.html.I have made it as a part of my project work and the device is not working properly.
I have used 74LS299 in place of 74HC299.Is it the problem .I connected the device to PC and tried to program an IC,but the programmer software goes hang.It shows "privilaged Instruction" whenever I click any button.It is told in the documentation that LED D2 has to go off before programming,but in my case both the LED's are on always.The 7805 IC is getting hotter.It cools down when we remove 74LS299. Can you please explain me the correct procedure to do the programming.When LED D2 has to go off,after connecting to computer or,after starting the programming.
 

CMOS

Advanced Member level 3
Joined
Jan 6, 2004
Messages
864
Helped
94
Reputation
186
Reaction score
50
Trophy points
1,308
Location
USA
Activity points
5,683
Re: A SERIOUS PROBLEM

Looks like you are using Windows XP. Parallel port access in XP is different than Win'98 and I think the programmer's software was written in Win'98 Era.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top