schottky diode voltage vs current graph
Hi.
There is a little problem: MURS360 isn't a schottky diode. I'm considering that you were refering to MURS360 and not a differently named schottky.
If the important property of the diode you're using is forward recorvery, with no regards to reverse recorvery time, you may want to use 1N400x.
Look at the MURS360 diode, it has the forward recorvery about the same as reverse, between 25 and 50 ns and capacitance of 135pF at 0V. The 1N400x on the other hand has capacitance of 15pF at 4V, much less, which is - as i belive - a major factor determining forward recorvery time. I've seen a study of this forward recorvery in several diodes and 1N400x scored almost the same as the tiny 1N4148. I don't remember how schottky scored, probably very well. Just bear in mind that 1N400x is very slow in reverse, so if there's any AC signal, it may cause trouble, otherwise it's a good choice.
And make sure what diode is the fast one you're considering. Schottky or not schottky could mean a big difference.
Also note that i'm no expert and could be quite likely wrong. ;D
John